How to refinish the paddleboard?Updated 2 years ago

If you want to refinish, we recommend sanding lightly the area you want to repair and carefully wiping off all the dust produced from sanding.

Next, apply two or three thin coats (one coat at a time) of epoxy or marine-grade polyurethane over the repaired and sanded area. Once each coat is dry, rub lightly with fine (220) sandpaper before adding a new coat. This will give you a smoother and better finish.

After the final coat, allow your board to dry for a few days to give it a chance to fully cure.

You can get the marine-grade polyurethane here.